Technical specifications |
|
| Crash test certified | PAS68:2013 V/7500(N3)/80/90:0.2/10 |
| Rated in compliance with |
IWA 14-1:2013 V/7200(N3C)/80/90 DOS K12 & ASTM M50 |
| Impact resistance |
2.000.000 joules 7,5T at 80km/h 3,5T at 112km/h |
| Obstacle height | 1000 mm |
| Obstacle width | 2/3/4/5/6 m |
| Foundation depth | 500 mm |
| Rising / lowering speed |
7 / 7 sec Enhanced speed available |
| Emergency Fast opening (Rising speed) | 1,5 sec |
| Hours / Days cycles |
300 / 2000 |
- In case of power failure, the obstacle can be lowered by a manual operation directly on the hydraulic pump. Additional options allow the obstacle to be lowered from a remote location OR to be raised and lowered (manual pump) OR an uninterrupted operation (UPS)
- The operation can be signaled by LEDS on the obstacle, a buzzer, traffic lights or a synchronization with a rising barrier.
- Finishing: the obstacle is anthracite grey painted covered by a non-slip metal or stainless steel sheet. The metal skirt is red and white.
- Activation: The hydraulic pump and the control unit are housed in a cabinet which could be up to 30m remote.